1, slitting rewinder winding uneven
This situation is mostly because the paper core is not suitable, and the paper core that meets the specified inner diameter needs to be removed and replaced. In addition, the coiling roller is used in the coiling process, which can also prevent the uneven coiling of the slitter.
2. Wrinkling of raw materials for slitting and winding
The key is that the winding tension force is wrong, adjust the suitable winding tension of Slitter, apply the pressure roller to winding, pack the slitting material into the overpressure roller, and then feed it into the winding core.
3. Wrong meter counting
For this kind of problem, the two wheels of the meter wheel should touch the feeding rubber stick together, and make a mark on the meter wheel. If the meter wheel is rotated for 5 circles, it will be calculated as 1 meter, otherwise the meter wheel should be removed and replaced.
On the slitting rewinder common faults and solutions, small series on this, I hope to help you!
